Share your video and audio signals all over the house without the hassle of running wires to the other rooms.
These powerful 2.4GHz or now the New 5.8 Ghz audio/video sender - have a 10mW signal that enables crystal clear reception of cable TV in a room away from the cable TV set top box!
We also have a Model that you can use your remote control in another room as the unit's repeater transmits the signals from your remote back to the source device!
The system can be used for all sorts of audio/video signals including:
Cable TV*
Video Recorders
Security cameras
DVD Players and Recorders
Extra Receivers Avialable
Each unit comes complete with
Stereo audio & video transmitter and receiver,
IR repeaters
Two plug pack AC adaptors and
Stereo AV Leads.
Additional receivers are available separately and allow you to set up multiple viewing locations around the house.
* Please note that the Infra Red Repeater may not work with Foxtel IQ, or some SONY Brand TV sets.
Video Sender with Remote Control Extender
Use your cable, TV, CD, DVD remote to change channels, volume and settings from the receiver end of this 2.4GHz system.
Features a phase-locked loop (PLL) electronic circuit that constantly adjusts, locking onto any input signal and avoiding any reception drift. Send stereo audio and video pictures around your home, shop or office, allowing you to watch video or listen to hi-fi quality stereo sound anywhere. Send surveillance camera images to another part of the building. All without the need to run cables.
The refreshing new compact design incorporates the 2.4GHz dipole antenna and has 4 selectable channels.
* Transmits a crisp audio and/or video signal using radio frequency
Comes as single receiver and transmitter with individual power supplies.
Additional receivers are available separately to allow reception at multiple viewing locations.(See below)
5.8GHz Wireless Audio and Video Transmitter and Receiver
This is the 5.8GHz Wireless Audio and Video Transmitter and Receiver.
Avoid interference on the crowded 2.4GHz ISM band. Video sender, 802,11b wireless LAN, Bluetooth, cordless phones, microwave ovens, can cause overcrowding and interference for items that transmit on the 2.4GHz band.
5.8GHz wireless AV transmitter with built-in IR transmitter/UHF receiver
5.8GHz wireless AV receiver with a built-in IR receiver/UHF transmitter
IR output cable to point directly at devices
Directional antenna minimises multi-path and interference
Range of up to 90 metres clear line of sight
Supports high S/N video output and stereo audio output
***DISCLAIMER*** Please note: the 5.8GHz Audio/Video transmission equipment does NOT comply with the ACMA class license requirements for this band (The regulations specify digital transmissions only on this band). Therefore, these products do not carry C-Tick compliance. It is quite legal, however, for us to offer these products for sale. Should you wish to take advantage of interference-free 5.8GHz A/V transmission you must understand that by using such equipment you are in breach of ACMA regulations. (This only applies to the 5.8Gig version, everything else we sell carries the approval numbers as needed)
Need to send 2 Video signals over a wireless Link? This unit will allow you to connect 2 Seperate video (and audio) signals to the Transmitter and then select which one you want to watch from the Receiver. Range is UPTO 30 Metres (depends on types of walls and other RF equipment around).